TruStar Safety
TruStar Safety Academy

Hot Work and Fire Watch

Know how welding, cutting and grinding start fires, how to avoid hot work or plan it, how to read a permit and set up the area, how to check cylinders and equipment, and how to stand a fire watch and close out the job, in about 40 minutes.

  • 40 min
  • Online, on a phone or a computer
  • Professionally narrated
  • Certificate, valid 36 months
Hot Work and Fire Watch is for welders, fitters, helpers, fire watches and the supervisors who issue permits, in fabrication shops, warehouses, on leases and at battery sites. It explains how sparks, slag and heat start fires, sometimes hours later and out of sight, and how to do the job cold or move it to a safe place before planning hot work. It covers the hot work permit and what each part means, setting up the area with 15 m cleared or protected, openings covered and the air tested for flammable gas, checking cylinders, hoses, regulators and flashback arrestors, standing a fire watch during the work and for at least 60 minutes after, with a final check at 4 hours, and closing out the permit. You sort jobs into hot work or not, match each job to a safer way to do it, find the answers in a hot work permit, find six problems around a mezzanine weld and five on an oxy-acetylene rig, make the calls as a fire watch on a lease, decide what to put out and what to get clear of, and plan cutting a bracket off a tank at a battery site, check your understanding after each module, and finish with a 25-question exam. Pass with 80% and your certificate is issued right away, valid for 36 months. Every screen is narrated, with captions and a full transcript. Two downloads are included: a before hot work checklist and a fire watch log. This course is general training about hot work and fire watch. It does not replace welding training or certification, your site's hot work permit procedure, or the training for your own site.

What you get

  • The course, to take at your own pace. Your place is saved, so you can stop and come back.
  • A TruStar Safety Academy certificate on your training record when you finish.
  • A free TruStar Connect account to keep it in. If your employer uses TruStar Connect, join them and your certificate goes with you.

Included with this course

  • Before hot work checklistOne page of the steps to work through before anyone strikes an arc or lights a torch, with a box to tick for each step.
  • Fire watch logOne page for the fire watch to record each check during the work and after it.

Yours when you buy the course: download it from the course's menu or its pass screen.

See inside

What you are paying for

Real screens from the course, the way you will see them on a computer or a phone.

  • Professionally narratedEvery screen is read aloud in a clear, professional voice, with timed captions and a full transcript.
  • Looks great on any devicePhone, tablet or computer. Your place is saved, so you can start on one and finish on another.
  • Hands-on, not slidesSort ten jobs into hot work or not, match each job to a safer way to do it, find the answers in a hot work permit, find six problems around a mezzanine weld and five on an oxy-acetylene rig, make the calls as a fire watch on a lease, decide what to put out and what to get clear of, and plan cutting a bracket off a tank at a battery site choice by choice, with a check at the end of each module.
The Hot Work and Fire Watch course on a laptop, showing a welder on a warehouse mezzanine with boxes, pallets and a forklift below, one problem found and a Show a hint button, and on a phone, sparks from hot work up high flying and falling, with how far they travel marked.
Find six problems around a mezzanine weld.
The Hot Work and Fire Watch course on a laptop, showing a sample hot work permit for a welding job in a warehouse, with sections for the job, hazards, gas testing, fire watch and close-out, and on a phone, a welder at the centre of a 15 metre circle with what to clear marked.
Read a hot work permit and find the answers in it.
The Hot Work and Fire Watch course on a laptop, showing a welder repairing a pipe rack support on a lease while a fire watch stands by with an extinguisher, and on a phone, an oxy-acetylene cart to check for problems.
Make the calls as a fire watch on a lease, choice by choice.

Your certificate

A certificate you can print, carry and check

Pass the exam and the certificate is yours at once, as a PDF to print or email, and on your training record in TruStar Connect.

Sample Hot Work and Fire Watch certificate for a learner named Jordan Tremblay
Full certificateLetter size with your name, the course, the date you passed and when it expires. Ready to print or send to an employer.
Front and back of a sample Hot Work and Fire Watch wallet card, with the QR code on the back
Wallet cardPage two of the same PDF. Print it at full size, cut along the marks, fold and laminate it. Its QR code opens your One Card.
A TruStar One Card on a phone, listing a worker's certificates and a QR code
TruStar One CardEvery certificate you hold on one card in your phone, with a QR code a supervisor can scan to see what is current today. Included with every course, even without an employer on TruStar Connect.

Sample shown. Yours carries your own name, dates and certificate number.

No surprises

  • A fresh exam drawn from a bank of 60 questions every attempt, 80% to pass, and the answers you missed shown once it is marked.
  • Valid for 36 months, with the expiry date on the certificate, the wallet card and your One Card.
  • Anyone can check a certificate at connect.trustarsafety.com/verify with its number and the holder's last name.
  • Captions, a full transcript and keyboard controls on every screen, built to WCAG 2.2 AA.
Check a certificate